HDMI wireless video transmitter 30M Support 3D 1080P WHDI Video/Audio Signal Transmission System YT-W300 manufacturer from China ShenZhen YouTing Technology Co.,LTD

HDMI wireless video transmitter 30M Support 3D 1080P WHDI Video/Audio Signal Transmission System

Price:	199.99~249.99 USD
Payment Terms:	T/T,D/P
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: YT-W300

Packing: carton box or other packagi...

Brand Name: youting

Weight: 0.4kg

standard: WHDI 1.0

Working frequency: 4.9Hz~ 5.9 GHz

Production Capacity: 5000

Delivery Date: 15-25days

Size: 146*93*25mm

Certificates: FCC CE

HDMI Interface: Support HDMI1.4A video/audi...

support 3D HDMI1.4 HDCP2.0
1080p 1080i 720p
With a transmission distance of 35m without latency
Remote control
Compatible design

Product specifications

Model	YT-W300T	YT-W300R
Supported Resolution	1080p 1080i 720p
HDMI Interface	Support HDMI1.4A video/audio format and encrypted video format HDCP2.0
Transmission Distance	35m without obstacles
System Latency	<1 ms
Antenna	Omni bearing built-in antenna
Power	100~ 240V alternating input current, 5V 3A direct current output power adaptor
Certificates	FCC CE
standard	WHDI 1.0
Supported interface	3.5mm plug,built out infrared remote control connector	Built in infrared receiving area
Working temperature	0℃ - 50℃
Dimension	146(L)93(W)25(H)mm

Product Feature

- Working frequency: 4.9Hz~ 5.9 GHz

- YTS function

- Compatible design

- Built-in antenna

- With a transmission distance of 35m without latency

- Remote control

- Support 3D effect

Packing Content

Please check whether the following contents are present in the package box. If any item is missed

or damaged, please contact the distributor.

Supplied Accessories:

One USB lead, 2 holding base, one infrared transmitting connector, one user manual, 2 power adaptors, one WHDI remote control.

Functions

- Power interface (DC IN JACK): to connect power adaptor.

- Infrared interface(IR slot): to connect extended infrared transmitting wire

- HDMI interface: to connect HD source equipment.

- Standby button: for device registration, entering into standby mode and awakening.

2.4.2WHDI Receiver YT-W300R Functions

2.4.3 Standby mode and Awakening

1)Entering into standby mode

- Long press (more than 3s) YT-W300T, transmitter and receiver will get into standby mode.

- Long press (more than 3 s) YT-W300R, transmitter and receiver will get into standby mode.

- Long press PWR on remote control, transmitter and receiver will get into standby mode.

2)Standby mode display

After getting into standby mode, video LED and Link LED will be off, power LED will be stay on red, connection will be paused.

3)Waking up from standby mode

-Long press button on YT-W300T and YT-W300R

-Press power button on remote control and standby mode will be awakened.

Please noted: if YT-W300T and YT-W300R are both in standby mode, please long press YT-W300T and YT-W300R separately.

2.4.4 Indicating LED

Working status	TransmitterYT-W300T			Receiver YT-W300R
Working status	Power	Video	Link	Power	Video	Link
Normal status	●	●	●	●		●
Add device	●	■	★	●	●
Standby mode	○			○

Remarks:○ red LED stays on ●green LED stays on ★green LED flash quickly.

3 Installation

number	name	function
1	PWR	Standby button, available to receiver
2	Add	To add output devices to device list; available to receiver
3	Delete	To delete receiver from device list or delete character of the device name, available to receiver
4	MENU	To show all the items; available to receiver
5	Guest	Temporary visit key; available to receiver
6	△	To up: available to receiver
7	▽	Down , available to receiver
8	▽	To the right ,available to receiver
9	▽	To the left,available to receiver
10	OK	To confirm,available to receiver
11	EXIT	To back/exit,available to receiver
12	Source	To list all the video source,available to receiver
13	Next Source	To select next video source,available to receiver
14	Pre Source	To select previous video source,available to receiver
15~18		Not available

4.2 Device register and add

1) Connect transmitter and receiver to output equipment and display equipment separately.

2) Use the remote control on receiver terminal.

-Click "MENU" button or "Add" button to show setup interface and choose "Add new video source"

Ø "Activate registration of video transmitter unit" item will be shown on display equipment.

Ø Short press (within 1 s) register button of transmitter, and link LED flashes

Ø The receiver will show available device name and confirming information.

Ø Use WHDI remote control to press OK

Ø Display equipment will show progress bar about register.

Ø The register will complete within 3 minutes(depending on distance and surrounded environment)

Ø Network will be connected automatically and transmit audio and video signals after registration.

Ø A maximal of 8 device scan be added as the steps mentioned above.

4.3 Delete Device

Ø Press "Source" button on remote control to choose the device you want to be deleted.

Ø Press "Delete" or "MENU" to select "Remove video source"

Ø Select the device to be deleted and press "OK"

Ø After deleting the device, press "Source" to ensure the device has been deleted.

Ø Other devices can be also deleted as the above procedures

4.4 Source Devices Name Modification

Ø Press "MENU" button on remote control to show setup menu, choose "Modify video source name" item.

Ø All available video sources will be displayed and use the navigation button on remote control to locate the device name you want to be modified.

Ø Use the navigation button on remote control to locate the characters you want to be modified.

Ø Press the "OK" button to submit the new name.

4.5 Devices Connection

Ø Press "Source" button on remote control to show device list.

Ø Locate desired device on list and press "OK" button on remote control to make connections.

4.6 Disconnect Device

Ø Press "MENU" button on remote control to show setup menu and choose "Disconnect Wireless link" item.

Ø Press "OK" button to disconnect network.

Ø If the disconnection is successful, the home screen will show " Wireless off".

4.7 Video/Audio Source Equipment Cutover

Ø Make sure all devices are connected successfully.

Ø Press "Source" button on remote control to choose video source.

Ø Press "Next Source" to go to next.

Ø Press "Pre source" to go to previous video source.

Troubleshooting

Please make sure all the devices is properly connected and receiver is not in standby mode before you follow the troubleshooting guide below.

No video	1, Check the status of LED, and check if the HD media player works normally. 2. Check if the joints and wires are damaged and make sure they are correctly connected to corresponding interface. 2, 3. Ensure there is video on output devices. 3, 4. Check the receiver is correctly connected to display equipment. 4, 5. Make sure all devices are working on supported distance. Draw them closer and try it again.
Power LED off	1, Make sure the power adaptor is correctly connected and the voltage is 5V3A 2, Make sure the power supply would not be interrupted. 3, Make sure transmitter is fully powered.
Receiver video indicating LED abnormal	1, Make sure video and audio signals can be transmitted to receiver successfully. 2, If there are video and audio signal on output devices, please check the indicating LED to see if something got wrong with it. 3, Make sure the device is working within the supported distance.
Bad picture	1. Ensure there is video on output devices. 2. Check if the receiver is correctly connected to display equipment and there is no damage on joints and wires. 3. Make sure all devices are working on supported distance. Draw them closer and try it again.
No sound or bad sound	1. Restart the transmitter and connect it again 2. Make sure there is no disturbance from the same frequency (4.9～5.9GHz)within 1 meter.
Register failure	1. Make sure the amount of registered source devices on display equipment is less than 8. 2. Ensure the distance between transmitter and receiver doesn't exceed supported distance. If it does, make them closer and try it again. Check if source device has been added on display equipment. If it has, delete it and make registration again.
Connection failure	1. Ensure the working distance doesn't exceed supported distance. If it does, make them closer and try it again. 2. Make sure source devices have been registered every time after software update. 3. Ensure source devices and display devices have been registered. 4. If failure occurs again, delete all registered information and try it again.
Other problems	If any other problems occur, please restart the device and make connections again.

No video

1, Check the status of LED, and check if the HD media player works normally.

2. Check if the joints and wires are damaged and make sure they are correctly connected to corresponding interface.

2, 3. Ensure there is video on output devices.

3, 4. Check the receiver is correctly connected to display equipment.

4, 5. Make sure all devices are working on supported distance. Draw them closer and try it again.

Power LED off

1, Make sure the power adaptor is correctly connected and the voltage is 5V3A

2, Make sure the power supply would not be interrupted.

3, Make sure transmitter is fully powered.

Receiver video indicating LED abnormal

1, Make sure video and audio signals can be transmitted to receiver successfully.

2, If there are video and audio signal on output devices, please check the indicating LED to see if something got wrong with it.

3, Make sure the device is working within the supported distance.

Bad picture

1. Ensure there is video on output devices.

2. Check if the receiver is correctly connected to display equipment and there is no damage on joints and wires.

3. Make sure all devices are working on supported distance. Draw them closer and try it again.

No sound or bad sound

1. Restart the transmitter and connect it again

2. Make sure there is no disturbance from the same frequency (4.9～5.9GHz)within 1 meter.

1. Make sure the amount of registered source devices on display equipment is less than 8.

2. Ensure the distance between transmitter and receiver doesn't exceed supported distance. If it does, make them closer and try it again.

Check if source device has been added on display equipment. If it has, delete it and make registration again.

Connection failure

1. Ensure the working distance doesn't exceed supported distance. If it does, make them closer and try it again.

2. Make sure source devices have been registered every time after software update.

3. Ensure source devices and display devices have been registered.

4. If failure occurs again, delete all registered information and try it again.

Find more related products in following catalogs on Hisupplier.com

Computers & Consumer Electronics >> Audio & Video Equipment >> Home Theatre System